You may be asking where all of this rain is coming from. Water vapour, as you might be aware, is a major component of breath. As a consequence, whenever you pull air into the compressor, water vapour enters as well. The system then compresses the air, causing the vapour to condense and stay in the tank. As a result, the compressed air in the tank raises the chance of rust forming.
In any case, how often you can empty your air compressor is largely dependent on how often you use it. If you use your air compressor on a regular basis, we suggest draining it once every couple of days.Since you’ll be using the air the next day, draining the air compressor isn’t that essential. Any way, you won’t have to waste energy filling it all over again.
However, if you do not use your air compressor on a daily basis, drainage is necessary at this point. Since the stored air will be there for an extended period of time, the risk of rust forming rises. As a consequence, we recommend draining the air compressor directly after use. It might be inconvenient to have to fill it all over again, but it saves the computer!
Many of you are now curious how to empty the air compressor tank. It’s easy. So let’s get started with a tutorial
Draining an Air Compressor Tank
However, releasing the air from the air tank is not for all. Since different designers do it in different ways. However, the basic steps are the same for all compressors. Let’s look at how to pull air out of an air compressor
Switch Off Your Air Compressor: The first move is to turn off your air compressor. You can’t continue to fill the tank with external air when draining the air compressor. Switch off or unplug the computer.
Reduce the Pressure: The second step is to lower the tank’s internal pressure. Simply pull the ring on the safety valve to do this. To do so, you must first locate your air compressor’s safety valve. Locate the safety valve using your instruction manual.
When you pull the ring, the tank’s pressure steadily decreases and the air inside is released. We firmly encourage you to wear protective glasses to avoid any potential injuries. This move can also be completed by covering the valve with one hand while pulling the ring with the other. Continue this process until there is no more air coming out of the tank and it is empty.
Drain Any Moisture: The third step is to drain any moisture from the tank. When it compresses the air, your air compressor tank can contain moisture or liquid. In this manner, it can compress any vapour or volatile substance in order to convert it to liquid. This liquid is one of the key causes of rust and tank impact.
In any case, open the drain valve to drain the moisture. The drain valve is not always located in the same location on all air compressors. So you must find the drain valve on your own or with the assistance of the user guide issued by the manufacturer firm.
Open the drain valve and allow the moisture to drain slowly. You should rotate the air compressor tank to drain out the residual moisture. If all of the moisture has been absorbed, make sure to shut the drain valve.
And you’re done! Place the air compressor in its designated location and repeat the process the next time you use it. Draining the air compressor isn’t as bad as you would imagine. For obvious reasons, it is important to keep everything high and dry. Don’t hesitate to do so.
For more information about Air Compressor Malaysia, please visit https://www.ldckomp.com.my
